Menu functions, Test settings (2-3), Test in (2-3-1) – Husqvarna 305 User Manual

Page 46: Test out (2-3-2)

Advertising
background image

46 - English

6. MENU FUNCTIONS

Distance (2-2-2)
Enter the distance in metres from the charging
station along the guide wire to the remote area
where the mower begins mowing.
Tip! Use the Test OUT (2-3-2) function to
determine how far it is to the remote area. The
distance, stated in metres, will be shown in the
mower display.

Test settings (2-3)

In the Test settings menu, it is possible to test
settings for Remote start (2-2) and to test that the
selected guide width works for the garden in question.

Test IN (2-3-1)

The Test IN (2-3-1) function allows you to test how
well the Automower

®

docks with the charging station.

Test IN (2-3-1) can only be performed after Test OUT
(2-3-2) has been performed.

Selecting this function causes the mower to travel
directly along the guide wire towards the charging
station and dock with it. The test is approved only if
the mower is able to dock with the charging station at
the first attempt. If the mower is unable to dock on the
first attempt, it will automatically try again. The
installation is not approved if the mower needs two or
more attempts to dock with the charging station.

Test OUT (2-3-2)

The Test OUT (2-3-2) function is used to test exit
settings and to calculate the distance from the
charging station to a remote area.

To test the settings for Remote start (2-2):

Park Automower

®

in the charging station and select

Test OUT (2-3-2). The mower will then leave the
charging station straight away along the guide wire and
begin mowing after the designated distance.

If there is a passage that the mower cannot get
through, the settings in Guide width (2-1) should be
changed from Wide to Medium. If required, the setting
can also be changed to Narrow. The Narrow guide
width setting should only be used if none of the other
settings work for this installation. When the Test OUT
function is activated, the mower travels the farthest
distance from the wire which is allowed by the selected
guide width.

The figure here shows how the Automower

®

travels

through a passage when Guide width is set to Medium
and not to Wide.

To find out the distance from the charging station to a
remote area:

Test in

Test out

Corridor width

Remote start

Test settings

Advertising