Trouble shooting – Husqvarna 305 User Manual

Page 59

Advertising
background image

English - 59

9. TROUBLE SHOOTING

Trapped

Automower

®

has got caught in

something.

Free Automower

®

and rectify the

reason for it getting trapped.

Automower

®

gets stuck behind a

number of obstacles.

Check if there are any obstacles
which make it hard for Automower

®

to

move on from this place.

Outside working area

The boundary wire connections to the
charging station are crossed.

Check that the boundary wire is
connected correctly.

The boundary wire is too close to the
edge of the working area.

Check that the boundary wire has
been laid according to the instructions
in chapter 3. Installation.

The working area slopes too much.

Check that the boundary wire has
been laid according to the instructions
in chapter 3. Installation.

The boundary wire has been routed
the wrong way around an island.

Check that the boundary wire has
been laid according to the instructions
in chapter 3. Installation.

Disturbances from metal objects
(fences, reinforcement steel) or
buried cables close by.

Try moving the boundary wire.

The mower finds it hard to distinguish
the signal from an Automower

®

installation close by.

Park A in the charging station and
generate a new loop signal via
Security -> New loop signal (3-3).

Low battery voltage

Automower

®

cannot find the charging

station.

Check that the charging station and
the guide wire are installed as
outlined in 3. Installation on page 15.

The guide wire is broken or not
connected.

Check that the indicator light on the
charging station flashes yellow. See
the solution in 9.2 Indicator light on
the charging station
on page 61.

The battery is spent.

Replace the battery. See 8.8 Battery
on page 56.

The charging station's antenna is
defective.

Check if the indicator light on the
charging station flashes red. See the
solution in 9.2 Indicator light on the
charging station
on page 61.

Wrong PIN code

Wrong PIN code has been entered.
Five attempts are permitted, and the
keypad will then be blocked for five
minutes.

Enter the correct PIN code. Contact
the local dealer if you forget the PIN
code.

Message

Cause

Action

Advertising