Installation – Husqvarna 305 User Manual
Page 30
30 - English
3. INSTALLATION
• - In the passage, the guide wire must therefore
be placed so that the mower has as much
space in which to run as possible. The distance
between the boundary wire and the guide wire
must however be at least 12” (30 cm).
If the guide wire has to be installed on a steep slope,
it is an advantage to lay the wire at an angle to the
slope. This makes it easier for the mower to follow the
guide wire on the slope.
Avoid laying the wire at sharp angles. This can make
it difficult for the mower to follow the guide wire.
4.
Run the guide wire to the spot on the boundary
wire where you want to make the connection.
5.
Lift out the boundary wire. Cut off the boundary
wire using a pair of wire cutters.
At least 12”/30 cm
Maximum
distance
At least 7ft/2 m
135º
135º
90º