HP vs80 User Manual

Page 59

Advertising
background image

Chapter 4

Diagnostics and Troubleshooting 59

Cleaning

Recurring cleaning message or

media attention light.

Make sure you are using a DLT vs80 compatible cleaning

cartridge.

Replace the existing cleaning cartridge with a new one.

If the Media Attention LED is cleared using a cleaning cartridge

and then immediately reappears after a particular data

cartridge is reloaded, that data cartridge might be

contaminated. If this occurs, check that the data cartridge can be

read, back up data from the suspect cartridge to another

cartridge, and then discard the suspect cartridge.

The Clean Drive LED is

illuminated.

Indicates that 250 tape motion hours have passed since you last

cleaned the tape drive.

Clean the tape drive. See

Cleaning the Tape Drive

on page 36

for instructions.

Cannot load the cleaning

cartridge.

Make sure you are using a DLT vs80 compatible cleaning

cartridge. (See

page 36

.)

Contact your service representative.

Media Compatibility

Media format invalid for drive

type.

You attempted to load incompatible media into the tape drive.

Ensure your media and format is compatible with a DLT vs80

tape drive. See

page 29

for more information.

Media is labeled as write

protected by the host server,

but restore from tape

successful.

Media with the DLT 4000 format was loaded into the tape drive.

The data is readable, but the media must be bulk erased before

the tape drive can write to this cartridge.

Table 4

Troubleshooting Table

Problem

Solution

Advertising