HP vs80 - Manual (Page 69)

Chapter 4 Diagnostics and Troubleshooting 69
3 0 B1 RAM error. Cycle power on the autoloader and attempt the
operation again. If the error recurs, contact your
technical support representative.
3 0 B2 NVRAM error. Cycle power on the autoloader and attempt the
operation again. If the error recurs, contact your
technical support representative.
3 0 B3 Controller timer failure. An unrecoverable failure has occurred in the mail
controller timer circuit.
3 0 B4 Loader to drive communication
IC error.
Failure in IC handling loader to drive
communication.
3 0 B5 Display error. Cycle power on the autoloader and attempt the
operation again. If the error recurs, contact your
technical support representative.
3 0 B6 Memory error. Cycle power on the autoloader and attempt the
operation again. If the error recurs, contact your
technical support representative.
3 0 B7 Timeout on autoloader
command
Cycle power on the autoloader and attempt the
operation again. If the error recurs, contact your
technical support representative.
3 0 BC Drive bug-checked. Cycle power on the autoloader and attempt the
operation again. If the error recurs, contact your
technical support representative.
3 0 BD Autoloader has loaded a
cartridge but drive is empty.
Cycle power on the autoloader and attempt the
operation again. If the error recurs, contact your
technical support representative.
3 0 BE Autoloader did not load the
cartridge that is currently in the
tape drive.
Cycle power on the autoloader and attempt the
operation again. If the error recurs, contact your
technical support representative.
3 0 BF Fatal error. Cycle power on the autoloader and attempt the
operation again. If the error recurs, contact your
technical support representative.
Table 5 Error Codes
Error Code Description Details