HP vs80 - Manual (Page 68)

68 Diagnostics and Troubleshooting Chapter 4
3 0 94 Cartridge unload error. A failure occurred while trying to unload a
cartridge from the drive to its slot.
3 0 95 Import error. An error occurred while trying to import a data
cartridge to a carousel slot.
3 0 96 Export error. An error occurred while trying to export a data
cartridge from its carousel slot. Can be caused by
an empty slot that is expected to be full.
3 0 A0 Carousel motion failure. Error occurred during carousel movement
(position not found). Could be caused by a
missing or misaligned cartridge carrier, an
obstruction, or an unexpected cartridge in the
carousel path.
3 0 A1 Cartridge transport position
error.
Cartridge transport element is unable to reach its
desired position. Failure occurred while trying to
place a cartridge into or remove a cartridge from
the drive or a slot.
3 0 A2 Gripper position error. Gripper unable to reach position.
3 0 A3 Cartridge pick error. Error occurred while trying to pull a cartridge
from the drive or a carousel slot.
3 0 A4 Mail slot position error. The mail slot door was not in the requested
position during device operation. Can be caused
by manually opening the door or a cartridge or
other obstruction is blocking the door. Try
removing the cartridge or obstruction, then
power cycle or reset the autoloader.
3 0 A5 Fan Error. Autoloader processor detected a fan error.
3 0 B0 ROM error. Cycle power on the autoloader and attempt the
operation again. If the error recurs, contact your
technical support representative.
Table 5 Error Codes
Error Code Description Details