HP E1418A - Manual (Page 106)

TRIGger:SOURce
TRIGger:SOURce sets the trigger source for the module.
Parameters
Parameter
Name
Parameter
Type
Range of
Values
Default
< source > discrete TTLT0, TTLT1, TTLT2, TTLT3, TTLT4,
TTLT5, TTLT6, TTLT7, BUS, HOLD,
IMM, or EXT
none
Comments •
The < source > parameter defines the following trigger conditions:
< source > Trigger
TTLT0–TTLT7 Sets the trigger source to one of the VXIbus backplane trigger lines.
BUS or HOLD Sets software trigger. A *TRG, TRIG:IMM, or GET will trigger the output.
IMMediate Places the trigger system in the wait-for-trigger state and then triggers the output.
EXTernal Sets the trigger source to the EXTernal trigger line on the terminal module.
•
If this command is received when the module is in the wait-for-trigger state, an
error is generated.
•
This command set the source for the trigger in to the module. The module can also
output a trigger on the VXIbus TTLTrg lines using the
OUTPut:TTLTrg n command.
•
Triggering is described in more detail on page 54.
•
Related Commands: TRIGger:SOURce?
•
*RST Condition: Trigger source set to HOLD .
TRIGger:SOURce?
TRIGger:SOURce? queries the trigger source for the module.
Parameters Returns: string.
Comments •
The query returns one of the following unquoted strings:
String Trigger Source
TTLT n VXIbus backplane trigger line n
BUS Software trigger
HOLD Trigger hold (reset state)
IMM Immediate trigger
EXT External trigger
TRIGger
Chapter 3 HP E1418A SCPI Command Reference 105
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com