HP E1418A - Manual (Page 81)

INITiate
The INITiate subsystem changes the trigger state from idle to wait-for-trigger.
Subsystem Syntax INITiate
[:IMMediate]
INITiate[:IMMediate]
Changes the trigger system from the idle state to the wait-for-trigger state.
Parameters None.
Comments •
If this command is received and the trigger system is not idle, an error is
generated.
•
If this command is received and no channels are waiting for a trigger event, an
error is generated.
•
Triggering is described in more detail on page 54.
•
Related Commands: TRIGger:SOURce , SOURce n :VOLTage:TRIGgered ,
SOURce n :CURRent:TRIGgered , ABORt
INITiate
80 HP E1418A SCPI Command Reference Chapter 3
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com