HP E1418A - Manual (Page 63)

Linking
Commands
Linking IEEE 488.2 Common Commands with SCPI Commands. Use a
semicolon between the commands. For example:
*RST;APPLy2:VOLT 10 or INIT:IMM;*IDN?
Linking Multiple SCPI Commands. Use both a semicolon and a colon between
the commands. For example:
SOURce2:FUNCtion:MODE VOLT;:SOURce2:VOLTage 10
SCPI Command Reference
The following sections describe the Standard Commands for Programmable
Instruments (SCPI) commands for the HP E1418A D/A Converter Module.
Commands are listed alphabetically by subsystem and within each subsystem. A
command guide is printed in the top margin of each page. The guide indicates the
current subsystem on that page.
62 HP E1418A SCPI Command Reference Chapter 3
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com