Hearth and Home Technologies Cyclone-BC - Manual (Page 34)

Heat & Glo • Cyclone-BN, Cyclone-BC • 2073-900 Rev. N • 10/08 34
Figure 12.4 The top of the glass assembly should come
in contact with the cylinder stops.
Figure 12.5 Hold the top of the assembly back against
the stops while raising the platform as shown.
Figure 12.6 Continue until all four screws have been
bottomed out and the glass cylinder is in place. Reverse
these steps to remove the assembly.
CYLINDER
STOP
Figure 12.7
Figure 12.8 Position the front cover panel as shown.
Now install the door.
REMOTE
F. Remote Control Service
The RC-Smart receiver is located behind the left side
refl ector panel (see Figure 12.7).
FRONT
COVER PANEL