HP 2425 - Manual (Page 62)

,QWURGXFWLRQ
406785%23ULQW6\VWHP2SHUDWLRQ 
,QWURGXFWLRQ
This chapter describes how to handle and clean the printer.
Blurred or splotchy prints and paper jams can result from dusty printer
parts. Regular cleaning takes only a few minutes and helps ensure
print quality. Printer parts that require cleaning are the paper pick-up
rollers and the outside surface of the printer.
+DQGOLQJWKH3ULQWHU
Handle the printer with care to preserve its life. Abuse may cause
damage. Keep the following guidelines in mind:
„
Avoid spraying cleaning solution directly on the printer’s surface;
the spray could penetrate through the air vents of the printer and
damage the internal circuits.
„ Be careful when cleaning the inside or removing paper jams, as
the fixing assembly and other internal parts become very hot.
Leave the printer cover open before handling the inside of the
printer.
„ Do not close the covers abruptly, or expose the printer to vibra-
tions.
„ Do not cover the printer immediately after using it. Turn it off and
wait until it cools down.
„
Do not leave the printer open for any length of time, especially in
well-lit places; light may damage the toner cartridge.
„
Do not open the printer during printing and do not tap paper
stacks on the printer.
„ Do not place anything on the printer and/or option deck covers.
„
Do not tilt, lubricate, or disassemble the printer.