HP 2425 - Manual (Page 63)

&OHDQLQJWKH
3ULQWHU
 3ULQWHU&DUH
„ Do not touch the electrical contacts, gears, or laser beam
devices. Doing so may damage the printer and cause the print
quality to deteriorate.
„
Keep media in the output tray at minimum level. If the media
stacks too high, your printer may experience media jams and
excessive media curl.
„ Make sure two people are available to lift the printer when moving
it. The printer weighs about 106 lbs (48 kg); do not attempt to
move it by yourself.
„
Keep the following in mind when storing the printer for an
extended period:
—Unplug the printer.
—Remove the toner cartridge from inside the printer. After
removing the cartridge from the printer, return it to the alumi-
num bag in which it was originally packaged or wrap it in a thick
cloth to protect it from direct sunlight or any other bright light.
—See the “Environmental Requirements” section of appendix B,
“Technical Specifications,” in the Reference guide, for storage
specifications.
&OHDQLQJWKH3ULQWHU
Fine particles of dust from the paper may accumulate inside the
printer which could affect the printer’s performance. The printer
should be cleaned on a regular basis to prevent potential malfunc-
tions. You need to clean only the following areas:
„
The outside of the printer
„ The anti-static teeth
„ The transfer guide area
„ The registration roller area