HP SP 3300 - Manual (Page 43)

10.2
<Installing accessories>
Activating the added memory in the PS printer
properties
After installing the memory module, you need to select it in the printer
properties of the PostScript printer driver in order to use it.
1 Make sure that the PostScript printer driver is installed on your
computer. For details about installing the PS printer driver, see
Software section.
2 Click the Windows Start menu.
3 For Windows 2000, select Settings and then Printers.
For Windows XP and Windows Server 2003, select Printers and
Faxes.
For Windows Vista, select Control Panel > Hardware and Sound
>
Printers.
4 Select the SP 3300 Series PS printer.
5 Click the right mouse button on the printer icon and select
Properties.
6 For Windows 2000/XP/0Vista and Windows Server 2003, select
Device Settings.
7 Select the amount of memory you installed from Printer Memory in
the Installable Options section.
8 Click OK.