HP SP 3300 - Manual (Page 71)

Using Your Printer with a Macintosh
25
7
Using Your Printer with a
Macintosh
Your machine supports Macintosh systems with a built-in USB
interface or a 10/100 Base-TX network interface card. When you
print a file from a Macintosh computer, you can use the PostScript
driver by installing the PPD file.
This chapter includes:
• Installing Software
• Setting Up the Printer
• Printing
Installing Software
The supplied CD-ROM that came with your machine provides you with
the PPD file to use the PS driver, Apple LaserWriter driver, for printing on
a Macintosh computer.
Printer driver
Installing the printer driver
1
Connect your machine to the computer using the USB cable or
the Ethernet cable.
2
Turn on your computer and the machine.
3
Insert the supplied CD-ROM which came with your machine
into the CD-ROM drive.
4
Double-click the SP 3300 Series on your Macintosh desktop.
5
Double-click the MAC_Installer folder.
6
Double-click the MAC_Printer folder.
7 For Mac OS 8.6~9.2, double-click the SP 3300 Series Installer
Classic icon.
For Mac OS 10.1 or higher, double-click the SP 3300 Series
Installer OSX icon.
8
Click Continue.
9
Click Install.
10 After the installation is finished, click Quit.
Uninstalling the printer driver
1 Insert the CD-ROM which came with your printer into the CD-
ROM drive.
2
Double-click CD-ROM icon that appears on your Macintosh
desktop.
3 Double-click the SP 3300 Series on your Macintosh desktop.
4
Double-click the MAC_Installer folder.
5
Double-click the MAC_Printer folder.
6 For Mac OS 8.6~9.2, double-click the SP 3300 Series Installer
Classic icon.
For Mac OS 10.1 or higher, double-click the SP 3300 Series
Installer OSX icon.
7
Select Uninstall and then click Uninstall.
8
Click Continue.
9 When the uninstallation is done, click Quit.