HP SP 3300 - Manual (Page 65)

Advanced Printing
19
Printing on Both Sides of Paper
You can print on both sides of a sheet of paper. Before printing, decide
how you want your document oriented.
The options are:
• Printer Setting, if you select this option, this feature is
determined by the setting you’ve made on the control panel of the
printer.
• None
• Long Edge, which is the conventional layout used in book
binding.
• Short Edge, which is the type often used with calendars.
• Reverse Duplex Printing, allows you to select general print
order compare to duplex print order.
N OTE : Do not print on both sides of labels, transparencies,
envelopes, or thick paper. Paper jamming and damage to the printer
may result.
1 To change the print settings from your software application,
access printer properties. “Printing a Document” on page 11.
2
From the Layout tab, select the paper orientation.
3
From the Double-sided Printing section, select the binding
option you want.
4
Click the Paper tab and select the paper source, size, and type.
5
Click OK and print the document.
Long Edge ▲
Short Edge ▲
2 5
3
2
5
3
2 5
3
2
5
3
Printing a Reduced or Enlarged
Document
You can change the size of a page’s content to appear larger or smaller
on the printed page.
1
To change the print settings from your software application,
access printer properties. See “Printing a Document” on
page 11.
2
From the Paper tab, select Reduce/Enlarge in the Printing
Type drop-down list.
3
Enter the scaling rate in the Percentage input box.
You can also click the
or button.
4
Select the paper source, size, and type in Paper Options.
5 Click OK and print the document.
Fitting Your Document to a Selected
Paper Size
This printer feature allows you to scale your print job to any selected
paper size regardless of the digital document size. This can be useful
when you want to check fine details on a small document.
1 To change the print settings from your software application,
access printer properties. See “Printing a Document” on
page 11.
2 From the Paper tab, select Fit to Page in the Printing Type
drop-down list.
3
Select the correct size from the Output size drop-down list.
4 Select the paper source, size, and type in Paper Options.
5 Click OK and print the document.
A