HP SP 3300 - Manual (Page 86)

Programs supplied on the CD
2.2
IP address setup
Before using your network print server in your network, you must set
TCP/IP addresses for the print server. You will need your printer card’s
MAC address, IP address, subnet mask, and gateway address. First,
check with your network administrator for the TCP/IP addresses.
Note: The MAC address is the hardware serial number of the network
printer card. You can check the address by printing the Network Printer
Configuration Page. For printing the page, refer to your printer user’s
guide.
You can set your print server’s IP address via the following methods:
• Set IP program: Go to the Using SetIP.
• Web Image Monitor SP 3300 Series: Once you have set an IP
address for your network print server, you can use the embedded
web server in the network printer card to change the address. Go to
next column.
• DHCP: You can use Dynamic Host Configuration Protocol (DHCP) to
get an IP address automatically assigned by your network
administrator, if your network system supports this protocol.s
• BOOTP: A network-based server using the BootStrap protocol
(BOOTP) can notify the network printer card of its assigned IP
address each time the printer turns on, if your network system
supports this protocol.
Note: To get an IP address from the DHCP or BOOTP server, the IP
assignment method must be set to DHCP or BOOTP.
Using SetIP
Windows
1 From the Start menu, select Programs or All Programs > SP
3300 Series > Set IP.
The program automatically detects and displays new and
configured print servers on your network.
2 Select the name of your printer and click . If you cannot find
your printer name, click to refresh the list.
Even with this step, if you cannot find your printer name, then
contact Network Administrator.
3 Enter your network printer card’s MAC address (hardware
address), IP address, subnet mask, default gateway, and then click
Apply.
4 Click OK to confirm the settings.
5 Click Exit to close the SetIP program.
MAC OS X
If you want to change your network printer IP setting, follow the below
instruction.
1 Printer the machine’s network information report which includes
your machine’s MAC address.
2 Open the Library folder > Printers > RFG > your printer model
name > Set IP.
3 Double click the SetIPApplet.html file.
Using Web Image Monitor SP 3300 Series
1 Run your web browser.
2 Enter your print server’s IP address in the URL field and click Go.
3 Click Network Settings > TCP/IP.
4 Select Static from IP Address Assignment Method.
5 Enter your print server’s TCP/IP addresses and click Apply.