HP SP 3300 - Manual (Page 89)

Print Driver Installation for Networked Printers
3.3
Test Print
To ensure the printer has been installed on the network correctly a test
print should be submitted from a client workstation. Perform the following
steps:
1 Open a document on a client workstation.
2 Select the SP 3300 Series as the printer for sending documents to.
3 Print the document on the device and verify that it prints correctly.
4 Ensure the print driver is installed on every workstation that will be
sending jobs to the device.
5 Repeat the test for all workstations that will be sending jobs to the
device.