HP SP 3300 - Manual (Page 55)

Installing Printer Software in Windows
9
N OTE : After setup is complete, if your printer driver doesn’t work
properly, reinstall the printer driver. See “Reinstalling Printer
Software” on page 9.
Reinstalling Printer Software
You can reinstall the software if installation fails.
1
Start Windows.
2 From the Start menu select Programs or All Programs →
SP 3300 Series → Maintenance.
3
Select Repair and click Next.
4
The list of printers available on the network appears. Select the
printer you want to install from the list and then click Next.
• If you do not see your printer on the list, click Update to
refresh the list, or select Add TCP/IP Port to add your printer
to the network. To add the printer to the network, enter the
port name and the IP address for the printer.
• To find a shared network printer (UNC Path), select Shared
Printer [UNC] and enter the shared name manually or find a
shared printer by clicking the Browse button.
You will see a component list so that you can reinstall any item
individually.
N OTE : If your printer is not already connected to the computer, the
following window will appear.
• After connecting the printer, click Next.
• If you don’t want to connect the printer at this time, click Next, and
No on the following screen. Then the installation will start and a
test page will not be printed at the end of the installation.
• The reinstallation window that appears in this User’s Guide may
differ depending on the interface in use.
5 Select the components you want to reinstall and click Next.
If you installed the printer software for local printing and you
select SP 3300 Series, the window asking you to print a test
page appears. Do as follows:
a. To print a test page, select the check box and click
Next.
b. If the test page prints out correctly, click Yes.
If it doesn’t, click No to reprint it.
6
When the reinstallation is done, click Finish.