Honeywell 9782 Series - Manual (Page 23)

Introduction
7/99 9782 Series Conductivity/Resistivity Analyzer/Controller - Operator’s Manual 1-9
Combined display
If two cells are connected to the Analyzer/Controller, then a display is available that includes the
measured variable for both cells (see Figure 1-3). Another combined display also includes the
temperature measured by each cell.
MIXED BEDS 1 AND 2
ALARM STRIPE
NC CAL ACK
C1 0.58 µS
C2 0.25 µS
TC
Figure 1-3 Representative Combined Display
Computed value
If the Analyzer/Controller is configured to calculate a computed value such as the ratio between
the cells’ readings, a screen will be available to display the value, along with a label (see Figure
1-4).
CATION TRAIN A
ALARM STRIPE
NC CAL ACK
0.67
RATIO
Figure 1-4 Representative Computed Value Display