HP R4.2 - Manual (Page 111)

3
Voice System Administration Message Administration
UCS 1000 R4.2 Administration 585-313-507 Issue 3 April 2000 72
Adding Message Destinations
The system’s message log provides a complete account of all messages
generated by the voice system. All system messages are assigned to the
appropriate destination during installation.
Note: If a message is changed from the event destination to the alarm
destination, a similar change should be made on the message
priority from none (–) to minor (*) and vice versa.
To add a destination to a message:
1 Start at the System Message Display window ( Figure 47 on page 69 ) for a
given message, and press F 8 (Chg-Keys).
The system displays the alternate set of function keys.
2 Press F 1 (Add–Dest).
The system displays the Add Message Destination window ( Figure 48 ).
Figure 48. Add Message Destination Window