HP R4.2 User Manual
Page 229
4
Switch Interface Administration
Digital Interfaces
UCS 1000 R4.2 Administration 585-313-507
Issue 3 April 2000 190
•
START DIAL SIGNALING PROVIDED BY CPE: WK
•
START DIAL SIGNALING PROVIDED TO CPE: WK (senderized
operation)
•
CPE DOES NOT SUPPORT DIFFERENT SIGNALING
BIDIRECTIONALLY
•
NUMBER OF DIGITS OUTPULSED TO CPE: This number should
match the number selected in the “Maximum Digits in Called
Number” E1/T1 option
•
THE CPE CAN ACCEPT “O” AS THE FIRST DIGIT
•
GLARE CONTROL: CPE WILL YIELD (WILL RELEASE)
•
DIRECT INWARD DIAL (DID): N
•
PBX ANSWER SUPERVISION WITHHELD: N
•
NETWORK AUTHORIZATION CODES: N
•
FRAME FORMAT: D4
•
IS PBX SENDERIZED: YES
•
CPE TIMING CAPABILITY: loop timed
•
SOURCE OF SYNCHRONIZATION PROVIDED BY CPE: NONE
•
SOURCE OF AUDIBLE RINGING ON CALLS TO CPE: PBX (CPE)