HP R4.2 - Manual (Page 424)

A
Summary of Commands autoreboot
UCS 1000 R4.2 Administration 585-313-507 Issue 3 April 2000 385
Synopsis
autoreboot [enable|disable] [reboots <numbers>] [window <minutes>]
[uptime <minutes>]
autoreboot [status|s]
autoreboot [help|h]
Description
The autoreboot command can be used to change parameters associated
with the auto-reboot feature and to monitor the status of these parameters.
The following options are recognized:
• enable|disable — This option specifies whether to enable or disable the
autoreboot feature. The default is enable.
• reboots <number> — This option specifies the number of unanticipated
reboots tolerated within the time period specified by window . The default
is 5.
• window <minutes> — This option specifies the time period for the
reboots parameter. The default is 60 minutes.