Step 4: make sure the product is online and ready – HP C309 User Manual

Page 56

Advertising
background image

c. Press the down arrow button until View Network Settings is highlighted, and then press

OK.

d. Press the down arrow button until Print Network Configuration Page is highlighted, and

then press OK.
This prints the Network Configuration Page.

Network Status

If the Network Status is Ready, the product is actively connected to
a network.

If the Network Status is Offline, the product is not connected to a
network. Run the Wireless Network Test (using the instructions at
the beginning of the Network Troubleshooting section) and follow
any recommendations.

URL

The URL shown here is the network address assigned to the product by
your router. You will need this address for step 2.

B: Check to see if you can access the HP Photosmart Premium Fax C309 series

home page

After you establish that the computer and the HP Photosmart both have active connections to a
network, you can verify if they are on the same network by accessing the HP Photosmart Premium
Fax C309 series home page. (The home page is a Web page that resides within the HP Photosmart.)

To access the HP Photosmart Premium Fax C309 series home page

On your computer, open the Web browser you normally use to access the Internet (for example,
Internet Explorer.) In the Address box, type the URL of the product as it was shown on the
Network Configuration Page (for example, http://192.168.1.101.)
The HP Photosmart Premium Fax C309 series home page should appear.

NOTE:

If you are using a proxy server in your browser, you might need to disable it to

access the Embedded Web Server.

If you can access the HP Photosmart Premium Fax C309 series home page, try using the product
over the network (such as to scan or print) to see if your network setup was successful.
If you cannot access the HP Photosmart Premium Fax C309 series home page or are still having
problems using the product over the network, continue to the next section regarding firewalls.

Step 3: Check to see if the firewall software is blocking communication

If you cannot access the HP Photosmart Premium Fax C309 series home page and are sure both
the computer and HP Photosmart Premium Fax C309 series have active connections to the same
network, the firewall security software might be blocking communication. Turn off any firewall security
software running on your computer and then try to access the HP Photosmart Premium Fax C309
series home page again. If you can access the home page, try using the HP Photosmart Premium
Fax C309 series (for printing or scanning).
If you are able to access the home page and use your HP Photosmart Premium Fax C309 series
with the firewall turned off, you will need to reconfigure your firewall settings to allow the computer
and HP Photosmart Premium Fax C309 series to communicate with each other over the network.
For more information, see

“Configure your firewall to work with HP products” on page 10

.

If you are able to access the HP Photosmart Premium Fax C309 series home page but are still
unable to use the HP Photosmart Premium Fax C309 series even with the firewall turned off, continue
to steps 4 and 5.

Step 4: Make sure the product is online and ready

If you have the HP Photosmart Software installed, you can check the product status from your
computer to see if the product is paused or offline, preventing you from using it.

Chapter 4

54

Troubleshooting and support

Trou

blesho

o

ting

and

s

uppo

rt

Advertising