HP C309 User Manual
Page 73
answering calls. If an error condition exists that is preventing the product from printing faxes,
review the display for information on the error condition. Make sure:
•
The product is set up correctly for faxing. For more information, see
HP Photosmart for faxing” on page 14
•
There is paper loaded in the input tray.
•
There is no paper jam.
•
The cartridge access door is closed. If not, remove all the originals you might have loaded
in the HP Photosmart and close the cartridge access door, as shown below:
•
The print carriage is not stalled or blocked. Turn off the product, remove any objects that
are blocking the print cartridge carriage (including any packing materials), and then turn on
the product again.
Resolve any problems found. The product automatically begins printing all the unprinted faxes
from memory. To clear the memory, you can also delete the faxes stored in memory by turning
off the product.
Cause: The memory of the product was full.
If this did not solve the issue, try the next solution.
Solution 11: Check for error messages on the display
Solution: If an error condition exists that is preventing the product from printing faxes, review
the display for information on the error condition. Make sure:
•
The product is on. Press the On button to turn on the product.
•
The product is set up correctly for faxing. See the printed documentation for more
information.
•
There is paper loaded in the input tray.
•
There is no paper jam.
•
The print carriage is not stalled or blocked. Turn off the product, remove any objects that
are blocking the print cartridge carriage (including any packing materials), and then turn on
the product again.
•
The print cartridge door is closed. If not, close the print cartridge door, as shown below:
Fax troubleshooting
71
Trou
blesho
o
ting
and
s
uppo
rt