HP 1240 Series - Manual (Page 22)

hp fax 1240 series
chapter 2
12
lo
a
d
or
igi
nals
& pa
per
6 Slide the paper guide in until it stops at the edge of the paper. Make sure
that the stack of paper lies flat in the paper tray and fits under the tab of
the paper guide.
load other types of paper in the paper tray
The following table provides guidelines for loading certain types of paper and
transparency film. For best results, adjust the paper type each time you change
paper types and paper sizes. For more information, see
set the paper type on
page 13.
set the paper type
Whenever you change paper types, be sure to set the paper type for your
HP Fax.
paper type settings
Select the Paper Type setting that matches the paper or transparency film you
are using. Use the paper types listed for best copy quality.
paper tips
HP Papers
• HP Premium Paper: Locate the gray arrow on the
nonprinting side of the paper, and then insert the
paper with the arrow side facing up.
• HP Premium Inkjet Transparency Film: Insert the film
so that the white transparency strip (with arrows
and the HP logo) is on top and goes into the paper
tray first.
• HP Greeting Card Paper, HP Glossy Greeting Card
Paper, or HP Textured Greeting Cards: slide a small
stack of greeting cards with the print side down,
completely forward into the paper tray until it can
go no further.
paper front panel setting
Copier paper or letterhead Plain
Other plain paper Plain