Delete speed-dial entries, Change fax resolution and lighter/darker settings, Change the fax resolution – HP 1240 Series User Manual
Page 48
hp fax 1240 series
chapter 3
38
fax
3
Press " or ! to scroll through the speed-dial entries, and then press
OK
to
select the appropriate entry.
4
When the current fax number appears, press " to erase it.
5
Reenter the fax number.
Tip:
To enter a pause in the fax number, press Redial/Pause.
6
Press
OK
to save the new number.
7
If you need to change the name, press " to erase it, and then reenter the
name using the keypad.
8
Press
OK
.
9
Press
1 (Yes)
to update another entry or
2 (No)
to exit.
delete speed-dial entries
Follow these steps to delete an individual or group speed-dial entry.
1
Press
Setup
.
2
Press
2
, then press
3
.
This selects Speed Dial Setup and then selects Delete Speed Dial.
3
Press ! until the speed-dial entry that you want to delete appears, and
then press
OK
. You can also enter the speed-dial code by using the front
panel.
Note:
Deleting a group speed-dial entry will not delete the individual
speed-dial entries that make up the group.
change fax resolution and lighter/darker settings
You can change the fax resolution and lighter/darker settings of documents that
you are sending.
Note:
These settings do not affect copy settings. Copy resolution and copy
contrast are set independently from fax resolution and fax contrast.
This section contains the following topics:
•
•
•
change the fax resolution
The Fax Resolution setting affects the transmission speed and quality of faxed
black-and-white documents. The HP Fax only sends faxes at the highest
resolution supported by the receiving fax machine. You can only change the fax