HP 1240 Series - Manual (Page 25)

user guide
load paper and load originals
15
load
or
igina
ls & pap
er
load originals
You can copy or fax an original by placing it in the document feeder tray. The
following procedure describes how to load originals into the HP Fax automatic
document feeder.
Note: The document feeder tray holds a maximum of 20 sheets of paper.
1 Load your original in the center of the document feeder tray face down
and top first.
Tip: Always load small originals in a portrait orientation, with the
shorter edge going into the HP Fax first.
2 Slide the document guides inward until they stop at the edges of the
original.
3 Press Copy , Fax , or Scan & Fax on the front panel.
Note: If you want to change a Copy, Fax, or Scan & Fax setting, press the
Copy, Fax, or Scan & Fax button repeatedly until the appropriate setting or
destination appears on the front panel display (You will need to enter the
Phone Number to go to the other menu items for Fax and Scan & Fax.).
Once the setting you want to change appears, press ! to move to a
specific value (such as a specific paper size) and then press OK to select
the setting or destination.
4 Press Start Black or Start Color on the front panel to start the job.