HP 610 - Manual (Page 24)

use copier features 18
hp digital copier series
enhance text
sharpness and
photo colors
Use Text enhancements to sharpen edges of black text. Text enhancement
is the default option. You can turn off Text enhancement by selecting Photo
or None if the following occur:
•
Stray dots of color surround some text on your copies.
• Large, black typefaces look splotchy (not smooth).
• Thin, colored objects or lines contain black sections.
• Horizontal grainy or white bands appear in light- to medium-gray
areas.
1 Press Menu.
2 Press 1, then press 1.
This selects Copy Setup, and then selects Enhancements.
3 Press until the desired enhancement (Text, Photo, Text and Photo,
or None) appears.
4 Press Enter to select an option.
5 Press Start Copy - Black or Start Copy - Color.
set the number
of copies
You can set the number of copies using the front panel.
1 Press Number of Copies.
2 Do any one of the following to enter a number:
a. Press
until the desired number of copies appears.
b. Enter a number with the keypad.
c. Use the +/- buttons until the desired number of copies appears.
3 Press Enter.
4 Press Start Copy - Black or Start Copy - Color.
change settings
for all copy tasks
Save the copy settings you use most often by setting them as the default.
You can save changes to Copy Setup options in the menu system, as well
as other Copy area settings.
1 Make any desired changes to the Copy Setup options.
2 Make any desired changes to the button settings in the Copy Area.
3 Press Menu.
4 Press 1, then press 4.
This selects Copy Setup, and then selects Set Copy Defaults.
You may also use
or to make your selections.
5 Wait or press Enter to confirm. Your settings are saved.
GwenRG.book Page 18 Thursday, January 31, 2002 5:20 PM