HP 610 - Manual (Page 29)

use copier features 23
hp digital copier series
1 Load your letter- or A4-sized originals in the ADF.
Tip! You cannot make legal-sized two-sided copies. For more
information on how to reduce legal-sized originals to letter-
sized copies, see reduce or enlarge a copy on page 16.
2 Press the Two-Sided Copy button repeatedly until the desired option
appears, or choose one of the following by pressing until the
desired setting appears and then press Enter.
– 1-sided original, 1-sided copy
This option produces a standard single-sided copy from a
single-sided original.
– 1-sided original, 2-sided copy
This option takes 2 single-sided originals and produces a
two-sided copy.
– 2-sided original, 1-sided copy
This option produces single-sided copies of a two-sided original.
– 2-sided original, 2-sided copy
This option produces a two-sided copy from a two-sided original.
3 Press Start Copy - Black or Start Copy - Color.
collate copies The collate feature lets you produce sets of copies in the exact order that
the original is loaded into the ADF. The collate feature is only available on
a HP 610 Digital Copier that is equipped with an ADF.
You must copy more than one original to use the collate feature.
1 Load originals in the ADF.
2 Press Menu.
3 Press 1, then press 0.
This selects Copy Setup, then selects Collation.
4 Press until the desired setting (On or Off) appears, then press
Enter.
If you turn the feature on, the front panel displays Collation On.
5 Press Start Copy - Black or Start Copy - Color.
make a poster When you use the Poster feature you divide your original into sections, then
enlarge the sections so you can assemble them into a poster.
GwenRG.book Page 23 Thursday, January 31, 2002 5:20 PM