HP 610 - Manual (Page 56)

maintain your hp digital copier 50
hp digital copier series
set the power save mode time
The bulb in your HP Digital Copier remains on for a specified period so that
the unit is immediately ready to respond to your request. When the
HP Digital Copier has not been used within that specified period, it turns
the bulb off to preserve power and displays Power Save On in the front-
panel display.
Tip! You can exit this mode by pressing any button on the
front panel.
Your unit is automatically set to enter power-save mode after 12 hours.
Follow these steps if you want the HP Digital Copier to enter this mode
earlier.
1 Press Menu.
2 Press 3, then press 6.
This selects the Status and Maintenance menu, then selects the Set
Power Save Mode Time option.
3 Press until the desired time appears, then press Enter.
set the ring and beep volume
The volume of the button beeps on your HP Digital Copier is preset, but you
can easily change the volume.
1 Press Menu.
2 Press 3, then press 8.
This selects the Status and Maintenance menu, then selects the Ring
and Beep Volume option.
3 Press to select Soft, Loud, or Off, then press Enter.
GwenRG.book Page 50 Thursday, January 31, 2002 5:20 PM