HP 610 - Manual (Page 34)

accessories
hp digital copier series
28
to attach the ADF lid
1 On the ADF lid, unfold the hinges.
2 Pull up both tabs.
3 Insert the ADF lid straight down into the unit.
4 Push down both tabs until they click.
5 Gently close the ADF lid.
Caution! To prevent damaging the unit, do not allow the ADF
lid to fall onto the flatbed surface. Always close the ADF lid
when the product is not in use.
install the ADF
input tray
1 Align the two tabs on the input tray with the two grooves in the ADF
cover.
2 Slide the tray into the grooves as shown until the tray snaps into
place.
3 Replug the power cord into a grounded AC outlet.
hinges
tab above
each hinge
ADF input tray
grooves
ADF cover
tab
GwenRG.book Page 28 Thursday, January 31, 2002 5:20 PM