Override the ink level gauge – HP 610 User Manual

Page 54

Advertising
background image

maintain your hp digital copier

48

hp digital copier series

3

Follow the instructions on the report to determine the correct Color

Patch Number.

4

At the prompt on the front-panel display, enter the Color Patch

Number, then press Enter.

to cancel a color calibration

1

Press Menu.

2

Press 3, then press 5.
This selects the Status and Maintenance menu, then selects the Restore

Factory Defaults option.

override the ink

level gauge

Overriding the Ink Level Gauge disables the printer’s ink level tracking

feature, but allows you to use a refilled cartridge.

Caution! If you use the override sequence described below,

you will disable the Ink Level Gauge for your ink cartridge. If

you choose to continue copying with an ink cartridge that has

had its Ink Level Gauge disabled, you will not know when the

cartridge is running low or empty. Copying with an empty

cartridge will seriously damage your printheads. Damage

that results from continued use of an ink cartridge with a

disabled Ink Level Gauge is not the responsibility of

Hewlett-Packard. Damage that results from the use of non-HP

ink is not the responsibility of Hewlett-Packard.

The Ink Level Gauge is automatically reset when a different ink cartridge is

installed in the copier.
Overriding the Ink Level Gauge does not affect ink cartridge expiration

dates. The copier cannot use an expired ink cartridge.
Follow these steps to override the Ink Level Gauge:

to override the ink level gauge for the black ink cartridge

1

Press

and

at the same time, then release.

2

On the keypad, press in order, 7, 8, 9.

3

When the prompt appears asking if you want to override the ink level

gauge, press 1 for Yes, or 2 for No.

to override the ink level gauge for the tri-color ink cartridge

1

Press

and

at the same time, then release.

2

On the keypad, press in order, 4, 5, 6.

3

When the prompt appears asking if you want to override the ink level

gauge, press 1 for Yes, or 2 for No.

Always install an ink cartridge before performing an Ink Level Gauge

override.

GwenRG.book Page 48 Thursday, January 31, 2002 5:20 PM

Advertising