HP 610 - Manual (Page 53)

maintain your digital copier 47
hp digital copier series
non-hp ink cartridges
The Ink Level Gauge may not work properly with a non-HP ink cartridge. If
you choose to use a non-HP ink cartridge, you may not know when the
cartridge is running low or empty. Copying with an empty ink cartridge
may seriously damage the printheads.
Any damage resulting from the use of a non-HP ink cartridge is not the
responsibility of Hewlett-Packard.
refilled ink cartridges
To install a refilled HP ink cartridge, you must override the Ink Level Gauge.
For more information, see override the ink level gauge on page 48.
perform color
calibration
The Color Calibration option prints out a report that lets you manually
improve your color printing or copying. You should perform this procedure
only if you see problems with color tints, such as noticeably incorrect flesh
tones.
1 Press Menu.
2 Press 3, then press 4.
This selects the Status and Maintenance menu, then selects the
Perform Color Calibration option.
A Color Calibration report is printed.
GwenRG.book Page 47 Thursday, January 31, 2002 5:20 PM