Henny Penny SCR-6/8 User Manual
Page 11
SCR-6/8
2-4. STACKING
Take care when moving the unit to prevent personal
injury. The SCR-8 weighs approximately 500 lbs.
(230 kg) and the SCR-6 weighs 380 lbs. (172 kg).
4.
Remove the three side panel screws from the top unit
and remove the three top side panel side screws from
the bottom unit.
5.
Mount the stacking brackets to each side of the units, as
shown in Figure 1, using the screws removed in step 4.
6.
Unit is now ready for use.
For units being installed in Canada, for Price Costco,
proceed with the following steps:
7.
Remove the black plug button from the top of the upper unit.
8.
Remove the screws from the channel assembly and take
the top two parts apart.
9.
Remove the screws along the corners of both top and
bottom units.
10. Mount one side of the channel to the units, using the
screws previously removed in step 9. See Figure 2.
11. Route the power cord up through the mounted channel
and attach the cover to the channel, using the screws
previously removed in step 8. See Figure 2.
12. Unit is now ready for use.
203
2-3
Figure 2
INSTRUCTIONS
(Continued)
Figure 1