Henny Penny SCR-6/8 - Manual (Page 29)

SCR-6/8
4-2. PROGRAMMING FOR
COOK AND HOLD
(Continued)
10. Repeat above steps for each product programmed. After
all products are programmed, exit the program mode by
holding in on the P button for 2 seconds.
11. You are now ready to cook.
The Program Mode will be automatically exited to
the Cook Mode if no buttons are pushed for 2 minutes
anytime during programming.
203 4-3
After multiple steps have been programmed, and the
Program Mode exited, the total cook time will show in
the display. The time for the next alarm can be viewed
by pressing and holding the ALARM button.