Furuno RP-250 - Manual (Page 10)

1. OPERATIONAL OVERVIEW
4
About the radar/video plotter display
When using the radar/video plotter display, you may erase marks, lines, grid,
etc. from the display to give priority to the radar display. This is also useful for
brightening charts.
1. Press the [NAV MENU] key to show the VIDEO PLOTTER 1 menu.
2. Press the [7] key to choose PLOTTER PRESENTATION.
3. Press the [7] key again to choose DEFAULT.
4. Press the [ENTER] key.
5. Press the [NAV MENU] key to close the menu.
Note:
To restore the normal display, choose USER SET at step 3.
Item and default setting (DEFAULT selected at step 3 above)
Item Setting Item Setting
Lighthouse, wreck ON Background
Black (green
characters)
Coastline ON Echo color Yellow
Land density ON Heading line brilliance Bright
Place name OFF Plotter brilliance MED 2
Mark OFF Range rings brilliance OFF
Own track OFF Chart brilliance MED 1
Other track OFF Symbol brilliance MED 1
Depth contour OFF Grid brilliance OFF
1.4 Choosing Presentation Mode
The RP-250 has five presentation modes: True Motion, North-up, Course-up,
Head-up and Cursor Gyro. You may choose a mode with the [MODE] key.
Note 1: Charts are not available for use in the Head-up and Cursor Gyro
modes.
Note 2:
In the true motion mode, the own ship mark is automatically reset to a
point of 75% radius when it is at a distance from the screen center 3/4
the range.