Furuno RP-250 - Manual (Page 31)

25
5 RECORDING, REPLAYING DATA
5.1 Formatting Memory Cards
Before you can use a memory card (RAM card) with the RP-250, the card must
be formatted. Formatting prepares the recording surface of the card for use with
the system. The RAM card comes in three types shown below.
Note:
You may format previously used memory cards; however, all data stored
on the card will be erased.
Type Code No.
00RAM01MC-003 00432818000
00RAM256C-001 00432107000
00RAM512C-002 00432223000
1. Insert a new memory card in the lower slot and press the [NAV MENU] and
[6] keys to choose CARD.
2. If RECORD is not in reverse video, press the [6] key again.
3. Press the [ENTER] key.
[RECORD]
1 [VIDEO PLOTTER(1)]
2 OWN SHIP PLOT
T
3 TARGET PLOT
A
4 MARK
M
5
6
7
8
9
0 FORMAT
NO/YES
RECORD menu
4. Press the [0] key twice to choose YES.
5. Press the [ENTER] key.
6. Press the [NAV MENU] key to close the menu.