Furuno RP-250 User Manual
Page 30
Advertising
4. WAYPOINTS, NAV LINES
24
4.5.8
Displaying navigation lines
Set nav line as show in previous paragraph and then follow the procedure
below to display nav line.
1. Press the [NAV MENU] and [3] keys.
2. Press the [3] key to choose NAV LINE NO.
3. Key in nav line no. with the numeric keys and then press the [ENTER] key.
You may enter five nav line numbers. Note that the same nav line no.
cannot be entered more than once.
4. Press the [NAV MENU] key to close the menu.
Note: To remove a nav line from the display, set NAV LINE to OFF.
Advertising