Furuno RP-250 - Manual (Page 24)

4. WAYPOINTS, NAV LINES
18
4.1.3 Entering waypoints at own ship position
1. Press the [NAV MENU], [4] and [2] keys.
2. Press the [2] key to choose OWN SHIP POSN.
3. Press the [3] key to choose WPT NO.
4. Enter waypoint number in two digits with the numeric keys and then press
the [ENTER] key.
5. Press the [NAV MENU] key to close the menu.
4.2 The Waypoint List
To display the waypoint list, which shows all registered waypoints, do the
following:
1. Press the [NAV MENU], [4] and [3] keys. Waypoint 00 (for own ship
position) through 09 are shown. Empty waypoints are denoted with
asterisks and 00 normally shows all asterisks.
2. To go to a next page, press the [0] key. Pressing the [1] key returns to
previous page.
[WPT LIST(1)]
1 [ENTER WPT, NAVLINE]
WPT
00
**° **.*** *
***° **.*** *
01 **° **.*** *
***° **.*** *
02 **° **.*** *
***° **.*** *
03 **° **.*** *
***° **.*** *
04 **° **.*** *
***° **.*** *
05 **° **.*** *
***° **.*** *
06 **° **.*** *
***° **.*** *
07 **° **.*** *
***° **.*** *
08 **° **.*** *
***° **.*** *
09 **° **.*** *
***° **.*** *
9 ERASE WPT00
0 [WPT LIST (2)]
WPT List
3. Press the [NAV MENU] key to close the menu.