Furuno RP-250 - Manual (Page 19)

13
3 MARKS, LINES
You can inscribe marks on the display to note important points, for example, a
buoy or a wreck. The mark memory capacity is 20,000 points.
3.1 Choosing Method of Entry
Marks can be entered by cursor position, specific latitude and longitude or own
ship position.
1. Press the [NAV MENU], [0] and [6] keys.
2. Press the [6] key to choose method of mark entry; CURSOR, L/L or OWN
SHIP POSN.
3. Press the [ENTER] key.
4. Press the [NAV MENU] key to close the menu.
3.2 Entering Marks/Lines
3.2.1 Entering marks/lines at cursor or own ship position
1. Press the [MARK] key to display the ENTER MARK menu.
MARK XX
NAV LINE
COAST LINE
CONTOUR LINE
PROHIBITED AREAS
CABLE
LINE CHANGE
MARK CANCEL
MARK COLOR
RED/MAGENTA/YEL/
GRN/CYAN/BLU/WHITE
CANCEL ENTER MARK:
CANCEL KEY
[ENTER MARK]
*2
*2 = Not shown on IMO type.
00 °00. 000 N/S
5-N 6-S
000
°00. 000 E/W
7-E 8-W
*1 = Shown when mark entry method
is "latitude and longitude."
* 1
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
ENTER MARK menu