Furuno RP-250 - Manual (Page 54)

9. INSTALLATION OF VIDEO PLOTTER KIT
48
1. Remove the right and left arm covers from the control head.
Right and left
arm covers
Pan Head Screw B
M4 x 10, 2 pcs.
Control Head
Control head
2. Unfasten bolts (M10, 2 pcs.)hidden by arm covers to separate the display
unit from the processor unit.
3. Pull the handle on the underside of the control head to draw the display unit
forward until you hear a click.
Note: Step 4 should be performed with two persons.
PULL FORWARD
Display unit