Furuno RP-250 - Manual (Page 45)

7. AIS OPERATION
39
7.8.2 Choosing history display attributes
You may choose history point color, the number of history points to show per
history plot interval and the history plot interval as below.
1. Press the [AIS MENU] key to open the AIS menu.
2. Press the [0] key to show the AIS2 menu.
3. Press the [3] key (HISTORY POINTS).
4. Further press the [3] key to choose number of history points to display per
plotting interval: 5 or 10.
5. Press the [ENTER] key.
6. Press the [4] key (HISTORY INTERVAL).
7. Press the [4] key again to choose history interval desired among 10, 30 s; 1,
2, 3 and 6 min.
8. Press the [ENTER] key.
9. Press the [5] key to choose HISTORY COLOR.
10. Press the [5] key again to choose color desired.
11. Press the [ENTER] key.
12. Press any menu key to close the menu.
7.9 AIS Symbol Color
You may choose the color for the AIS symbols among red, magenta, yellow*,
green*, cyan, blue and white*. (* = Not available on IMO type.)
1. Press the [AIS MENU] key to open the AIS menu.
2. Press the [0] key to show the AIS2 menu.
3. Press the [6] key (SYMBOL COLOR).
4. Further press the [6] key to choose color desired.
5. Press the [ENTER] key.
6. Press any menu key to close the menu.