Frymaster FLYMASTER KSCFH18E - Manual (Page 8)

KSCFH18E COOL ZONE SERIES ELECTRIC FRYERS
CHAPTER 2: IMPORTANT INFORMATION
2-1
2.1 General
Proper installation is essential for the safe, efficient, trouble-free operation of this
appliance. Any unauthorized alteration of this equipment will void the Frymaster
warranty.
NOTICE
If this equipment is wired directly into the electrical power supply, a means for
disconnection from the supply having a contact separation of at least 3-mm in all
poles must be incorporated in the fixed wiring.
NOTICE
This equipment must be positioned so that the plug is accessible unless other
means for disconnection from the power supply (e.g., a circuit breaker) is provided.
NOTICE
If this appliance is permanently connected to fixed wiring, it must be connected by
means of copper wires having a temperature rating of not less than 75°C (167°F).
NOTICE
If the electrical power supply cord is damaged it must be replaced by a
Frymaster/Dean Factory Authorized Service Center technician or a similarly qualified
person in order to avoid a hazard.
DANGER
This appliance MUST be connected to a power supply having the same voltage and
phase as specified on the rating plate located on the inside of the fryer door.
DANGER
All wiring connections for this appliance MUST be made in accordance with the
wiring diagrams furnished with the fryer. Refer to the wiring diagram(s) affixed to
the inside of the fryer door when installing or servicing this equipment.