Fluke NetDAQ 2645A - Manual (Page 171)

Using Trend Link for Fluke
Getting the Right Look for Your Trend Link Chart
5
5-25
ds140s.bmp
You can position and size the printed chart by entering X and Y Offsets and
Width and Height settings. The X and Y Offsets specify the position of the upper-
left corner of the printed page, and the Width and Height determine the size of the
printed chart. If you enter impossible values, Trend Link prints a default (full-
page) chart.
For example, X=500, Y=750, and Width=1400, Height=1650 results in the
following printed chart: