Fluke NetDAQ 2645A User Manual

Page 307

Advertising
background image

Error Messages & Exception Conditions

Error and Status Messages

J

J-9

Cannot write to Trend Link Data Set! Check amount of free disk
space available.

You are trying to write to a Trend Link data file on a disk drive that has little or
no storage capacity.

To use this disk drive, delete unneeded files to create space for the Trend Link
data file with its associated data set. To delete old Trend Link data files, see
"Deleting Old Trend Link Files” in Chapter 5 of this manual.

Cannot write to Trend Link infolink.ini! Check file permissions or
location of file.

Trend Link is unable to write to your

infolink.ini

file.

The Trend Link

infolink.ini

file is either missing, corrupted, is from a

previous version of Trend Link, or is write-protected. Trend Link will look for the

infolink.ini

file in one of three places. The default location is in the

c:\Program Files\Fluke\tl

directory. Refer to Chapter 4 of your Trend

Link for Fluke manual for more information. Check your Trend Link installation
or reinstall Trend Link using the procedures in Chapter 2.

Cannot open data file!

Your data file cannot be opened.

Enter a valid file name and directory path.

Cannot open file [File Name]!

Your input file for a conversion utility (Utilities menu) cannot be opened.

Enter a valid file name or valid formatted file.

Cannot write to NETDAQ.INI file! Check file permissions.

You are not being allowed to write to the

c:\Program

Files\Fluke\netdaq\netdaq.ini

file (assuming you have used the

default directory).

Check the permissions for the

netdaq.ini

file. In particular, remove Read-

Only protection. If you have

netdaq.ini

opened in an editor or some other

application, close that application.

Changes made in lower level dialog boxes will be lost. Are you sure
you want to cancel?

This will occur in the Instrument Configuration, Channels Configuration, and
Data File Configuration dialog boxes if the user cancels after having made
changes in lower level dialogs under these dialogs. For example, if the user okays

Advertising
This manual is related to the following products: