Fluke NetDAQ 2645A - Manual (Page 341)

Index (continued)
3
Copying channels, 3-26
Creating instrument icon, 3-8
Crosstalk considerations, 2-11, B-2
Current setup
saving the, 3-11
Curve Preferences, 5-18
Curve Status Display, Configuring the, 5-17
Custom-385 RTD, D-2
—D—
Data file format, F-1
Data files
ASCII, 4-13
binary, 4-13
configuring, 4-14
converting, 4-18
converting from Binary to ASCII, 4-18
trend link, 4-14
viewing and printing, 4-18
Data transmission and storage rate,
increasing, 4-20
DC power, 2-7
DDE example using Excel, G-2
DDE links reference, G-1
Deadband values
specifying, 4-16
Defining a computed channel equation, 3-20
Deleting an instrument from the
Network, 3-7
Deleting instrument icon, 3-9
Describing the instruments, 3-25
Designating instruments
asynchronous, 3-9
group, 3-9
Digital I/O, 1-8, 2-12, A-4
Digital I/O connections, 2-11
Digital I/O output test, 6-26
Digital input test, 6-27
Digital input/output tests, 6-26
Dimmed configuration commands, 3-15
Display
variations in the, 6-34
Displaying a monitor channel, 2-22
Displaying a Trend Link Chart During
Logging, 5-3
Displaying the totalizer status, 2-26
Driver
Ethernet adapter, I-20
NDIS, I-20
ODI, I-20
packet, I-10
Drivers, I-9, I-20
Dynamic data exchange (DDE), 4-12, G-1
—E—
Effects of internal noise in ac
measurements, C-1
Equation syntax, 3-21
Error and status messages, J-2
Error codes, 6-3
Ethernet adapter installation, 2-43
Ethernet Adapters, host computer, 1-15
Ethernet address, viewing of, 2-41
Ethernet cabling, 2-45, H-1
Ethernet port selection, 1-12
Excel, DDE example, G-2
Exception condition, J-2
Exporting Trend Link Data Files, 5-9
External trigger, 1-10
External trigger wiring, group
instrument, 2-15
—F—
Features, instrument, 1-4
File format, F-1
Files
data, 4-13
setup, 3-11
Files, data
configuring, 4-14
converting from Binary to ASCII, 4-18
converting from Binary to Trend
Link, 4-18
Fixed-385 RTD, D-1
Frequency accuracy test, 6-14
Frequency Update, Real-Time, 5-23
Front panel controls, 2-17