Farallon Communications R9100 - Manual (Page 120)

12-2 User’s Reference Guide
General status
Current Date: The current date; this can be set with the Date and Time utility (see “Date and time” on
page 8-12 ).
Default IP Gateway: Actual IP address of the default gateway, if entered. 0.0.0.0 indicates automatic
addressing.
Domain Name Server: IP address of your DNS ser ver.
Domain Name: Domain name you have entered, usually your ISP, such as netopia.com.
CPU Load: Percentage of the system’s resources being used by all current transmissions.
Unused Memory: The total remaining system memor y available for use.
Ethernet Address: The Netopia R9100’s hardware address.
IP Address: The Netopia R9100’s IP address, entered in the IP Setup screen.
IPX Address: The Netopia R9100’s IPX address, entered in the IPX Setup screen.
EtherTalk Address: The Netopia R9100’s AppleTalk address on its EtherTalk Phase II inter face, entered in the
EtherTalk Phase II Setup screen (only if the optional AppleTalk feature set is installed).
LocalTalk Address: The Netopia R9100’s AppleTalk address on its LocalTalk inter face, entered in the LocalTalk
Setup screen (only if the optional AppleTalk feature set is installed).
Status lights
This section shows the current real-time status of the Netopia R9100’s status lights (LEDs). It is useful for
remotely monitoring the router’s status. The Quick View screen’s arrangement of LEDs corresponds to the
physical arrangement of LEDs on the router.
Quick View 12/14/1998 01:13:52 PM
Default IP Gateway: 0.0.0.0 CPU Load: 5% Unused Memory: 1017 KB
Domain Name Server: 0.0.0.0
Domain Name: netopia.com
----------------MAC Address--------IP Address-------IPX Address---EtherTalk---
Ethernet Hub: 00-00-c5-70-03-48 192.168.1.1 34449:150
Ethernet WAN1: 00-00-c5-70-03-4a 0.0.0.0
LED Status
PWR-+-----WAN1------+--CON--AUX--+-----WAN2------+--EN--+--------LEDS---------
LNK RDY CH1 CH2 LNK LNK LNK RDY CH1 CH2 DATA | '-'= Off 'G'= Green
G - - - - Y - - - - - - | ’R’= Red ’Y’= Yellow