Farallon Communications R9100 - Manual (Page 66)

8-6 User’s Reference Guide
7. Select Datalink Options and press Return. The Datalink Options screen appears.
You can accept the defaults, or change them if you wish. You can also specify user name and password for
both outgoing and incoming calls. the Send User Name/Password parameters are used to specify your
identity when dialing out to a remote location. The Receive User Name/Password parameters are used
when receiving dial-in clients such as via RAS configuration.
Return to the Add Connection Profile screen by pressing Escape.
8. Select Telco Options and press return. the Telco Options screen appears.
Datalink (PPP/MP) Options
Data Compression... Ascend LZS
Receive User Name:
Receive Password:
Maximum Packet Size: 1500
In this Screen you will configure the PPP/MP specific connection params.
Telco Options
Idle Timeout (seconds): 300
Return accepts * ESC cancels * Left/Right moves insertion point * Del deletes.
In this Screen you configure options for the ways you will establish a link.