Farallon Communications R9100 User Manual
Page 52
7-2 User’s Reference Guide
A screen similar to the following Main Menu appears:
If you do not see the Main Menu, verify that:
■
The computer used to view the console screen has its serial por t connected to the Netopia R9100’s
Console por t or an Ethernet connection to one of its Ethernet por ts. See
“Connecting a console cable to
“Connecting through a Telnet session” on page 6-2
.
■
The Telnet or terminal emulation software is configured for the recommended values.
■
If you are connecting via the Console por t, your computer’s serial por t is not being used by another device,
such as an internal modem, or an application. Turn off all other programs (other than your terminal
emulation program) that may be inter fering with your access to the por t.
■
You have entered the correct password, if necessar y. Your Netopia R9100’s console access may be
password protected from a previous configuration. See your system administrator to obtain the password.
See
Appendix A, “Troubleshooting,”
for more suggestions.
Netopia R9100 v4.3
Easy Setup...
WAN Configuration...
System Configuration...
Utilities & Diagnostics...
Statistics & Logs...
Quick Menus...
Quick View...
Your Baud Rate has been changed to 57600
You always start from this main screen.