Farallon Communications R9100 - Manual (Page 130)

12-12 User’s Reference Guide
System Information
The System Information screen gives a summar y view of the general system level values in the Netopia R9100
Ethernet Router.
From the Statistics & Logs menu select System Information. The System Information screen appears.
The information display varies by model, firmware version, feature set, and so on. You can tell at a glance your
par ticular system configuration.
SNMP
The Netopia R9100 includes a Simple Network Management Protocol (SNMP) agent, allowing monitoring and
configuration by a standard SNMP manager.
The Netopia R9100 suppor ts the following management information base (MIB) documents:
■ MIB II (RFC 1213)
■ Inter face MIB (RFC 1229)
■ Ethernet MIB (RFC 1643)
■ AppleTalk MIB I (RFC 1243)
■ Netopia MIB
These MIBs are on the Netopia R9100 CD included with the Netopia R9100. Load these MIBs into your SNMP
management software in the order they are listed here. Follow the instructions included with your SNMP
manager on how to load MIBs.
System Information
Serial Number 70-03-48 (7340872)
Firmware Version 4.3
Processor Speed (MHz) 33
Flash ROM Capacity (MBytes) 1
DRAM Capacity (MBytes) 4
Ethernet 8 Port 10Base-T
Auxiliary Serial Port LocalTalk
WAN 1 Interface Ethernet
WAN 2 Interface Not Installed
AppleTalk Feature Set Installed
Analog Dial-In Kit Installed